*Full Set included:

1.Host;

2.Soldering iron handle (1m length);

3.Power line:2pcs (AC input voltage 100V-220V,1.5A/ DC input voltage 12V,2A);

4.Knife shape of white soldering tip: 1pcs, cuspidal white soldering tip:1pcs (the core of soldering tip can order separately, cost 5.2$ each)

5.Built-in chargeable superior lithium battery pack: 12V 3600MA, small size,low weight, which is also convenient to work outside . 

6.It can charge to full in 3 hours with AC110V-220V, which will stop charging automatically when fully charged. After that,it can work about 3 hours outside.

7.This product can heat up quickly to 450 degree, which can adjust temperature accurately. display in LED screen.

8.LED screen will precisely display all data, simply chinese or English meanu can be choosed. 

9.White soldering tips have 3 months warranty, host has 1 year warranty.

*Main functions and features:

1.Temperature control range:150～480℃

2.Automatic compensation range of Thermocouple cold junction is -9-99℃(need to be accurate).

4.It can save 5 groups of temperature.

5.It can keep the temperature calibration parameters of every tip seperately, support all types tips of T12, and it has 6 customized heads, which also can shield uncommon heads.

6.Automatic standby(1-60min can be set）

7.Automatic sleep mode(1-60min can be set)

*Main operations:

1.Normally, the clockwise rotation is less than 3 grids in 1 second, and it enters standby (default 200 degrees (150-300 degrees configurable) state). If the set temperature is lower than 200 degrees, it will go to sleep directly.

1.1In the standby, continuously rotate clockwise 3 grids (soft shutdown) in 1 second, and in the sleep (soft shutdown) state, press the encoder to enter the working state.

1.2In the standby, press the encoder or rotate counterclockwise to resume working.

Go to the previous menu.

2.Normally, the counterclockwise rotation is 3 grids in 1 second, and the power is increased. The current temperature is +50 degrees (10-200 degrees configurable). After 5 minutes (1 to 60 minutes can be set), it can automatically reply. Also can operate the encoder to recover in advance.

3.Normally,short press to enter the temperature setting state.

3.1In the temperature setting, the temperature of the current setting group can be adjusted by rotating the encoder. The default step is 5 degrees (steps 1-50 can be set).

3.2In the temperature setting,switch the setting group by holding down the rotary encoder and rotating

3.3In the temperature setting, short press the encoder to save and exit to normal status.

4.Normally,Pressing the encoder and rotating it counterclockwise can enter the head change interface. Under this interface, the output is turned off, and the head change operation can be performed with power. You can switch the header type. And call the correction curve of the relevant header.

5.Normally, press the encoder and rotate clockwise to enter the temperature comparison interface, you can compare the parameters of the current tip, you can also restore the default correction parameters. Before entering the correction wizard, you need to restore the default correction parameters.

6.Normally,press and hold the encoder for 2 seconds to open the setup menu

7.All settings interface and menu, long press the encoder for 2 seconds to exit without saving

*Basic operation:

In normal pattern, spin encoder to adjust temperature;

In normal pattern, click encoder to access to Strengthened Model(450 degree);

In normal pattern,stand still for 3 minutes goes into a sleep mode, which can help you use it longer. And you can enter into menu to set time.

In normal pattern,long press 3 seconds to enter into setting.

*Setting menu details:

1.Solder tip choice

2.Dormant time setting

3.Dormant temperature setting

4.Timed shutdown setting

5.Timed shutdown mode

6.nactivity Delay off screen

7.Buzzer setting

8.Alert sound setting

9.Manual temperature compensation

10.Temperature supplyment coefficient setting

11.50 degree correction

12.100 degree correction

13.200 degree correction

14.300 degree correction

15.400 degree correction

16.Restore default values

17.Language setting(Simplified Chinese,English)

18.Version information

19.Encoder direction

20.Sensitiveness to shock

21.Power source and Voltage correction

22.Maximum Temperature setting

23.The lower voltage setting

24.Clock setting

25.Temperature lock

26.Power-on password

27.Screen protection setting

28.Doule-click the button

29.Click the button

30.Quit.

Please register and login at first.

Once you finish shopping, all the items you wish to purchase are added to your basket. Your next step will be to go through the checkout process and make payment. Please do as follows.

(1)Click the "Add to Cart" button of all the products you need.
(2)Click the "Cart" button at the top of top right corner.
(3)Confirmed the products you choose and press “Check Out” button.
(4)Fill in your Shipping Address, Shipping Method and Payment Method, then press “Next” button.
(5)Confirm all the information again and press “Submit” button.
(6)Complete the payment checkout procedure using your preferred payment method.

(7)we will send you a confirmation email with all the details within 24 hours (except holidays)

You may compete your payment through HSBC Bank, Western Union, Paypal, Money Gram, National Australia Bank, Bank of China, Bangkok Bank, Sigue or Alipay. Please see the details in our payment options.

Our price is variable according to your purchasing amount or promotional activity. Prices may be changed when service representative email Shipment Confirmation to you.

Unless there are obvious mistakes, the price of the Products is subject to that indicated on this website. Although we make our best endeavor to make sure the accuracy of the price, errors may occur. If we found that the Products you ordered are with a wrong price, we will inform you as soon as possible. After being informed, you are entitled to re-confirm the correct price or cancel your order. If we cannot reach you, your order will be deemed as cancelled. Your payment will be fully refunded.

If your original order qualified for free shipping, you may be issued a full refund less our original shipping costs.

Please exercise reasonable care while you are in possession of the Products. If your use of the Products has exceeded the needs for inspection and confirmation of its quality and function, which caused the value of the Products are depreciated, for instance, the Products are dirty or damaged, we will reject your return.  

You may contact a service representative of Hua Shi Locksmith House to assist you with product return.

In circumstances where you consider that the Product are defective, please contact a service representative promptly with details of the Product and its damages. In addition, you could also contact us by sabine@lockpick.me to receive return instructions. Defective products will be refunded or exchange.

If your order was shipped via  DHL, please contact your local DHL office immediately. Please retain the carton, packaging, and damaged contents for DHL inspection. Then contact your service representative of Hua Shi Locksmith House to assist you with product replacement. All claims must be filed within 5 days after the receipt of order.